 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Pilot won't stay lit on Bryant 394GAD036100
I have a Bryant model 394GAD036100 furnace, no air. The pilot light will light but will not stay lit when turned to "ON" position on gas valve. Unit is at least 15 years old, with a thermocouple, no wires. The pilot light seems small after releasing knob to be able to rotate to on position
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I bought a Kenmore power miser gas water heater in May of 2002 The First 3 years and 8 month's I had the waterheater I did not have 1 problem. In January of 2006 the light went out and tried to light it. It stayed Lid until I released the button and it went out. I called sears Because it is...
Unit seems to work fine (heat & air). Noticed pilot was out recently, relit and was fine for several days. Noticed it was blowing cold air again and noticed pilot out again. Relit, burner ignites fine and cycles on and off fine (pilot remains lit). After a couple of days, pilot out again. Same...
I have a Bryant Model 397H. Have had an intermitent problem for the past 3 years. Furnace starts normally, burners come on and in about 5 seconds go off. This can repeat two to three times before remaining on and running normally. I have had two repairmen out to look at it and both times it would...
I have a snyder-general furnace and my pilot won't stay on after you turn it from pilot to on I tried evrything... is it the thermocouple or does this furnace have a sensor... and if so how do I change it out... furnace was manufacture in 91...
View more questions Search
|
