Ask Experts Questions for FREE Help !
Ask
    wizzard77's Avatar
    wizzard77 Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Nov 22, 2007, 01:09 PM
    B&S Flywheel , which ones fit
    Hi, I have a Briggs & Stratton 18 HP Horizontally Opposed Twin Motor...

    I need a flywheel for it... What all models (HP) will work on it.?

    The motor is Model: 422707
    Type 1501 01
    Ckode: 89032312

    Any help will be greatly appreciated...

    P.S. will the aluminum flywheels work. Mine was currently cast iron

    Thanks for your time... Hope you all had a great thanksgiving day.
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Nov 24, 2007, 07:46 AM
    You need to only go with the original flywheel designed and specified for your engine. Even if an aluminum one fit, I would think that the difference in weight of each flywheel could cause problems, maybe not, but possible. I would only go with the original. And it is not often that a flywheel needs replaced, why is the reason that you are replacing yours?
    wizzard77's Avatar
    wizzard77 Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Nov 24, 2007, 07:54 AM
    Hey, thanks for the reply... Mine was damaged during removal... Was frozen and could not be removed easily...
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

B&S 13.5 OHV, flywheel 180 off? [ 5 Answers ]

Hi, I have a Briggs 13.5 OHV engine that I am having trouble with. Can the flywheel be off by 180 degreees?

Briggs & Stratton 14.5hp Flywheel ring [ 1 Answers ]

Today we put on a new flywheel ring gear and a new starter pinion gear. The new flywheel ring is aluminum instead of the plastic that was on it. I was told this was due to the starter gear being easier to replace it will be the first to be worn down. We tried starting the tractor and the starter...

Flywheel won't turn [ 27 Answers ]

Ok, Yardman is several years old (I believe about about ten years or so) but I have had it a few months. Worked fine for awhile. Last few times I would cut it would cut for a good while then it would just cut off. Battery is weak so I would always have to jump it off beforehand. No problem with...

Flywheel slow and will not fully crank [ 2 Answers ]

I cannot get my mower to start . It tries to start the starter tries to spin the ly wheel but it just can't do it faswt enough . What can I do I even hooked it up to a battery charger and did a 50 amp car start but it just is like it has glue on it it is so slow. It is a murry with a 12.5 hp...

B&s flywheel [ 1 Answers ]

The flywheel on my briggs looks like its been under water for ages it real rusty can anybody tell me the best way to clean it without doing any harm .the flywheel is removed so I want to clean inside and out

View more questions Search