Ask Experts Questions for FREE Help !
Ask
    Stickdude's Avatar
    Stickdude Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Nov 23, 2007, 06:26 AM
    400 amp service disconnect
    I am installing a 400 amp service (non-residential). Outside of the building I want to put a Combination Service Entrance Device (meter main) with two 200 amp breakers. These breakers will feed two 42 circuit load centers located inside and directly behind the CSED. Do I need main breakers in each of these load centers? I think it would be a good idea even if is not required.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Nov 23, 2007, 06:34 AM
    Main breakers are not required in these panels fed by the actual Main Service Disconnecting Means, which are the two 200 amp Mains at the meter.

    You may have Main breakers in the panels if desired for convenience and redundant protection, but not required by Code.

    Just be sure to do the grounding of the neutral at the meter/disconnect combo, and use 4 wire feeder to both panels, and keep the neutral and equipment ground separate in both panels.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

400 amp service, 2 200 amp panels, 320 amp meter socket [ 10 Answers ]

Hi, this is my first post here, but I have been reading a lot and have already learned a bunch. I want to thank TK already and hope you reply to this. I am in the process of designing my electrical system for my new home. I have some electrical experience, but am by no means a pro. I am...

400 amp service with 2-200 amp panels & 320 amp socket [ 6 Answers ]

Hi TK. I am running 400 amp service into my new contruction home. The electric compnay is running a single 400 amp line to the meter. I have to split it to the two panels at that point. You had told me once before that I need a 320 amp meter socket and then run 2-200 amp lines to the separate...

Grounding for 400 amp service [ 1 Answers ]

How to ground 400 amp service with 2 200 amp panels one on disconnect switch

400 amp service [ 1 Answers ]

I need a diagram of what a typical power pole to detached garage the to house service looks like making a 200 amp service in each building

400 amp service for home [ 2 Answers ]

I'm building a home and want to have 400 amp service. I understand the way this is done is by running (2) 200 amp panels in the house. My service provider asked me for a riser diagram for this service. I'm not sure how to draw this? Can you help?

View more questions Search