 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
No flush?
Hello,
First time on and need advice. I just replaced the bolts and washers that hold the tank onto the base. Now when I flush, the water will not escape through the outlet hole. Sorry, did not know the actual name. I am wondering if the gasket has anything to do with this?:eek: |
||||
|
||||
|
Lets take this one step at a time. You changed the tank bolts and washer but nothing else, right? Does the tank fill properly to 1/4" below the over flow tube? When you flush does the arm move in the tank and raise the flapper? If the tank is full and the flapper comes up it should drain. Back to you.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hi I hope so one can help, we can not flush our toilet, it is filling up OK and then when you go to flush it you push down the handle and it will not flush. I have taken the lid off and the metel bar that is attached to the handle comes up but it does not let the water out? I hope someone...
Hello, We live in a 1976 bi-level.. recebntly in the past two or three years we have noticed that our toilet will not flush up stairs if we are using the washer... If we go away for several days the toilet takes two or three flushes before it will totally flush the whole way... By this I mean you...
My friend recently rented an apartment in Akron, Ohio and tried everything to clean the pre-existing SEVERE hard water stains from the toilet with no luck. He decided the only remedy would be to get a new toilet since he was so embarrassed by the unsightly appearance. He contacted the landlord to...
View more questions Search
|
