Ask Experts Questions for FREE Help !
Ask
    andyroo315's Avatar
    andyroo315 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Oct 29, 2007, 07:51 AM
    Fan kicks on when heat does
    Hello
    I have a williamson oil forced air furnace. I had a lux digital thermostat and replaced it with a programmable one. Now when my heat kicks on it turns the fan on with it not allowing the hot air chamber to get warm and send cool air until the air is warm...

    I am not familiar nor does the directions really explain where to set the jumpers on the thermostat. It is a lux cag1500 series... any help would be greatly appriciated
    AJ
    juggallojed's Avatar
    juggallojed Posts: 165, Reputation: 10
    Junior Member
    		  
    #2

    Oct 29, 2007, 06:16 PM
    One jumper says gas or electric set it for gas and the fan should act normal again.
    Look at your directions to see witch one that is.
    andyroo315's Avatar
    andyroo315 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Oct 30, 2007, 07:43 AM
    Thanks, there was a small panal on the back of the thermostat that needed taken off to find the jumpers... I set it for gas and it is fine... now I just have to figure out how to set the limit switch so it runs right... we just bought this house a month ago. It has a brand new furnace in it, the lady had it installed in June and died in October so it was never used last year or ever in fact...
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I set the temp, heat kicks on for 30 seconds, then shuts off [ 5 Answers ]

I know next to zilch when it comes to my heating and air system, so that's why I'm kind of led to believe this may be something simple. We have natural gas heat for our home. Lately, it's been a little cooler in the day so I've set the thermostat for about 73 degrees and switched the system over...

Heat runs with ac and even auto kicks on emg heat [ 1 Answers ]

(Coleman Evcon) Some how the hot and cold on the inside thermostat switched.how is that possible?and how do I fix it?

Both fans continuously running, but neither heat or ac kicks on [ 3 Answers ]

This is a '93 Goodman gas model furnace. From what I have read, I believe it may have a bad limit switch. Where would this be located and how can it be tested? There is a small Black component (roughly 3x2")with a Blue on/off switch located on the furnace where gas passes. I believe this may be the...

Heat comes on and kicks off hot tub [ 1 Answers ]

I bought a hot tub and it worked fine for three months. The problem I am having is heat comes on and kicks off hot tub. I replaced the gfci on the electrical side and nothing. I put a fan on the controls and it seem to work (heated up all day then kicked out again) any help would help. Thanks again

Thermostat on Heat and Auto fan but fan is not on [ 2 Answers ]

Hi, This just started happening. I have a dual zone thermostat. The thermostat downstairs seems to turn on. I set the desired temp at 72 but it does not get any warmer then 67. The thermostat upstairs... I set it on auto but the fan does not run. If I set it on Fan, cold air blows out. ...

View more questions Search