Ask Experts Questions for FREE Help !
Ask
    tim42's Avatar
    tim42 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 28, 2007, 07:11 AM
    Murray riding mower
    I have a murry riding mower and the drive belt broke I need a diagram of the complete drive belt system showing how the belt goes around all pullies it is a 14.5 motor with a 42 incn deck if you have one please send it to me at this address [email protected]
    tim42's Avatar
    tim42 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Oct 28, 2007, 07:14 AM
    do you know where I can find a picture diagram of the drive belt showing how the pullies and belt are in the right place it is a 14.5 motor with a 42in deck and model number is 42590x92a
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #3

    Oct 28, 2007, 11:29 AM
    Go to your local briggs and stratton dealer (which overtook murray) and see if they can print you out a diagram.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Mower Replacement Belt, Old Murray Riding Mower [ 2 Answers ]

I have a model 38618X92E. I am looking for a manual or parts catalogue for this model so I can find the proper replacement belt. Thanks.

Murray Riding Mower [ 2 Answers ]

How can I safely raise mower up to change blades?

Murray riding mower [ 3 Answers ]

I have a murray riding mower that I have replaced the solinoid and the starting switch but I still get no power to the starter. I can hot wire the starter and it will crank so there must be a problem somewher in the wires??

Murray Riding Mower [ 1 Answers ]

I bought a used Murray riding mower with a 40" deck. I want to add a mulching kit but can't seem to find one. Does anyone know if there are any interchangeable parts that will fit this mower?

Murray Riding Mower [ 1 Answers ]

I have a murray riding mower that I purchased in August of 1991. Apparently I need a new transaxle because it will not go in gear at all. The part # in the book is Dana model 4450-1 which I have been unable to locate, the only reference I have come across for the part says that it has been...

View more questions Search