Ask Experts Questions for FREE Help !
Ask
    micheryl's Avatar
    micheryl Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 24, 2007, 03:03 PM
    Furnace filter for a Concord 80 plus furnace
    I just moved into a beautiful home. I am currently a renter. There is a new concord 80 plus furnace installed. I know it needs a filter but I'm not for sure as to where it goes?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Oct 24, 2007, 04:14 PM
    Usuall in the blower compartment or a place in the return air duct near the furnace.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    Oct 24, 2007, 05:34 PM
    HVAC is correct. The return plunum is the large rectangluar duct that reaches almost to the floor and then turns horizontally to enter the furnace box. There should be a trap door or slide tray in that short horizontal section. Match the dimensions of the new filter exactly with the old, no wiggle room here. This is what HVAC actually already said, I just changed the vocab a bit for non-HVAC folks.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Concord Gas Furnace [ 2 Answers ]

I have a Concord Gas Furnace Model CG90UB... it currently is wired to run the fan on low speed which I find is not adequate to move the air around the house... I would like to know how to change the fan speed to run on medium... the manual states there are four speeds... Low, Low Medium, Medium and...

Concord 90% Efficiency Furnace Troubleshooting [ 2 Answers ]

The furnaces vent blower comes on then no ignition of gas ,so it turns back off.? Does anyone know the Led Trouble shooting codes for this counterflow furnace? Model #45738-001.

Concord 80 plus furnace [ 2 Answers ]

I am wondering how many BTu this furnace is? I can not find it anywhere. Thanks!

Concord furnace? [ 1 Answers ]

I have a concord furnace model # rgu90a100d14-3a and was wondering what the cfm for this unit is?

Concord Furnace parts [ 1 Answers ]

I have a Concord Furnace and needs some parts for it. But I don't know where to get them. No one seems to carry parts for this furnace or even know much about them.

View more questions Search