Ask Experts Questions for FREE Help !
Ask
    BROWN422's Avatar
    BROWN422 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 6, 2007, 06:31 AM
    Concord Furnace parts




    I have a Concord Furnace and needs some parts for it. But I don't know where to get them. No one seems to carry parts for this furnace or even know much about them.
    wades79's Avatar
    wades79 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Apr 29, 2007, 05:29 PM
    Quote Originally Posted by BROWN422



    I have a Concord Furnace and needs some parts for it. But I don't know where to get them. No one seems to carry parts for this furnace or even know much about them.
    I think they were bought out by lennox. Try 1-800-9-lennox
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Concord Gas Furnace [ 2 Answers ]

I have a Concord Gas Furnace Model CG90UB... it currently is wired to run the fan on low speed which I find is not adequate to move the air around the house... I would like to know how to change the fan speed to run on medium... the manual states there are four speeds... Low, Low Medium, Medium and...

Concord 90% Efficiency Furnace Troubleshooting [ 2 Answers ]

The furnaces vent blower comes on then no ignition of gas ,so it turns back off.? Does anyone know the Led Trouble shooting codes for this counterflow furnace? Model #45738-001.

Open limit switch on Concord Gas Furnace [ 14 Answers ]

I have a Concord 80 Plus Gas Furnace. I am starting the furnace for the winter and it gives me a LED code of open limit switch or limit switch circuit. Everything seems to work fine up until the point where the blower needs to turn on. I had the same problem last year but got a tech to fix it. I am...

Concord 80 plus furnace [ 2 Answers ]

I am wondering how many BTu this furnace is? I can not find it anywhere. Thanks!

Concord furnace not igniting - no click sound [ 1 Answers ]

I have a Concord 80% furnace apx. 4.5 years old. It has not been used for 6-7 months as the tenants were not paying the gas bill. Now that they are out, I went to start it up... and nothing. I get the igniter to light (M shaped Norton) and the system cycles, blower runs, but no "click sound"...

View more questions Search