Ask Experts Questions for FREE Help !
Ask
    JULIE200's Avatar
    JULIE200 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 14, 2007, 11:15 AM
    INSTALLING Programmable Thermostat Need Assistance
    I have a gas furnace with electronic ignition 5 wires red blue white yellow and green... My new Hunter thermostat reads G RC RH YO WB and Y1 where does each wire connect on the new thermostat??
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Oct 14, 2007, 02:11 PM
    In the beginning of this board there are sticky notes in regards to thermoststs. You will find your answer there.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Installing programmable Thermostat [ 2 Answers ]

I am upgrading my old cheap mercury thermostat with a Honeywell programmable model - RTH6300B (a 5-2). When I removed the old unit there were two wires - black & white (labelled B and W). The new unit has 6 connections - C,G,W,Y,R & Rc. There are a number of alternate letters given: C - X or...

Installing Noma programmable thermostat [ 4 Answers ]

Hi all, like many others I have installed the NOMA Heating/Cooling programmable thermostat Model: 52-2570-6. It is replacing the old round-style analog mercury thermostat dial. The wiring connections on the old one were: Wire colour: RED -----------> R GREEN --------> G WHITE -------->...

Installing a Honeywell programmable thermostat [ 1 Answers ]

I am replacing an old mercury thermostat with a honeywell rth7000. I have a heat pump Unit. Current Mercury wired as such: Red wire to R Brown wire to T Orange wire to O Green wire to G Yellow wire to Y Blue wire to B

Installing a Programmable Thermostat [ 1 Answers ]

I have a 10 year old Carrier thermostat and want to install a new programmable thermostat. The thermostat has 5 wires (red, yellow, green, blue and white). All of the programmable thermostats only instruct you on how to install with 3 or 4 wires. Does anyone have a suggestion on a...

Problems installing a programmable thermostat [ 2 Answers ]

Hi there, Just got a Honeywell RTH230B programmable thermostat to replace the old one. I have a gas furnace. I uninstalled the old thermostat and found three wires: Red, connected to terminal marked "R" White, connected to terminal marked "W" Green, connected to terminal marked "B" I was a...

View more questions Search