Ask Experts Questions for FREE Help !
Ask
    louangaphay's Avatar
    louangaphay Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 13, 2007, 03:07 PM
    Removing drain assembly from shower, relacing shower pan
    How do I remove part of the old drain assembly that has been glued to the drain pipe that comes up from the slab floor.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Oct 13, 2007, 07:47 PM
    What part do you wish to remove? If it's the piece that's glued on then you'll have to saw it out. Good luck, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My shower drain is raised above the shower pan by 3/16" causing standing water [ 2 Answers ]

I have a fiberglass shower stall where the bottom has either slumped or the stall was installed wrong to begin with (it has no support beneath the surface that I stand on). The drain sticks above the level line so I have about 3/16" of standing water. I cannot easily access the bottom from the...

Removing a Shower Tile Pan on a concrete slab (Basement) [ 3 Answers ]

I am trying to figure out the best way to remove a tiled shower pan from my shower in the basement. I am planning on replacing the floor pan with a pre-fabricated version. I am presuming that I remove the existing tile with a chisel and hammer, my concern is how do I make the area level once I...

Removing shower drain for shower pan replacement [ 1 Answers ]

I am in the process of removing an existing shower tray. I am having difficulty in removing the drain. It does not appear to screw in. I have access to from below if I need to cut pvc pipe. This appears to be the only thing keeping my tray in place at this time.

Removing shower pan [ 4 Answers ]

We are chasing a water leak around a shower stall and have removed the glass doors and molding around the shower pan. Want to remove the shower pan but are confused how high the lip goes up under the tiled walls. Are we going to end up removing some of the tile to get the pan out? Hopefully the...

Removing Shower Pan [ 5 Answers ]

I'm replacing my shower pan with tile. I've got all the old tile removed and the pan is fully exposed. I've removed the screws that were holding it to the studs. What do I do next? Thanks Curyman

View more questions Search