Ask Experts Questions for FREE Help !
Ask
    rbentz's Avatar
    rbentz Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 16, 2007, 03:57 PM
    Dryer not heating up
    I have a dryer about 8 years old. I thought the heating element was bad and I replaced it. I found out since that the element was fine. So were the 3 thermostats. There is no clog with any lint and every thing seems to work on the thing just no heat. The breaker also is OK. Any suggestions.
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Sep 16, 2007, 04:28 PM
    Maybe no lint in the venting hose, but have you removed the cabinet and cleaned the blower and blower housing? Also you will have an air inlet and outlet screen that get clogged eaisly. Also check and see if the blower is working inside the unit
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dryer not Heating [ 2 Answers ]

I have a Kenmore dryer and it has not been heating up. I replaced the heating element and its still not getting hot. What else could it be?

Dryer Not Heating [ 1 Answers ]

Maytag gas dryer not heating, igniter glows for about 15 to 20 sec but burner does not lite

Dryer Not Heating [ 31 Answers ]

I have a 14 year old Kenmore electric dryer that recently stopped heating. Everything else seems to be working fine. The drum works and there is plenty of air flow. I checking the different thermostats and heater element with a ohm meter and they all seemed to have activity except for the...

Dryer not heating [ 6 Answers ]

I have a Kemmore dryer that has stopped heating. The dryer tumbles and all apears to be good except no heat. I have checked the following: Thermal cutout - 0 ohms - Good Exhaust Thermostat - 0 ohms - good Heater thermostat - 0 ohms - good Heating element - 0 ohms - good Wiring - all good...

View more questions Search