[flacker]

I have a Kenmore Dryer model 110.73022100 that runs but doesn't heat up. I have replaced the ingnitor, thermostate and thermostate fuse and nothing has helped.

I have detached and check the gas line which works fine but there is no ingition of the pilot when the dryer is turned on.

Any thoughts?

[esquire1]

Have you cleaned the vent hose from back of dryer to where it exits house? Have you opend up the unit and cleaned the vents inside unit? Also there are 2 vent screen, 1 inlet & 1 exit for lint Also remove the vent housing inside the unit and clean. It is critical for all to be clean in order for dryer to dry clothes

[flacker]

I have cleaned out the exhaust vent but didn't do anything with the internal. We always clean out the lent trap but that's about as far as we have gone internally.

I will take a look at it.

Thanks,

[esquire1]

You need to remove cabinet and clean thouroughly inside unit and disassemble the vent and blower housing