Ask Experts Questions for FREE Help !
Ask
    jloebe's Avatar
    jloebe Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Sep 12, 2007, 09:30 PM
    GE front loader loud on spin cycle
    Talk about planned obsolesence! My GE dryer that I bought in late in 01' fried the rear drum bearing and now it's partner, the front loader washing machine is starting to get loud while in spin cycle. Both units are about 6 months out of warranty. Coincidence?? I think not. Anyway, Applguy gave great advice on fixing the dryer... maybe someone can help with the washer. It still functions fine, seems to get up to speed OK, but is starting to sound rough - the dry bearing sound while in spin. It used to be so quiet. Now we can hear it upstairs. Any advice would be greatly appreciated. THANKS!
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Sep 13, 2007, 08:33 AM
    Could be the tub bearing. Also I would check the coupler between the motor and the transimission
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore washer front loader [ 4 Answers ]

Hi, I have a Kenmore front loader washer that is five years old and is now making noises (periodic squealing). I removed the back panel and it looks like the belt is rubbing into the container. Can this belt be adjusted or am I looking at replacing this machine? Love the Kenmore, but cannot...

Whirlpool Front Loader won't wash [ 4 Answers ]

Model AWM 1821, won't fill with water , have checked water inlets(solenoids) and they are OK, level sensor not to sure but it looks OK. When washer is put through test sequence as per service manual it does fill but won't go into wash sequence, door light willl come on and that's where it stays,...

Frigidaire front loader [ 1 Answers ]

My basement recently flodded and I think it damaged the front loading washer I have. When I plugged it back in it seems to work, but the washer doesn't spin... it just fills with water and then nothing... no washing, no spinning.. no nothing! How can this be repaired ?:(

Frigidaire front loader not spinning [ 1 Answers ]

I've checked out the motor resistance and everything checks out to spec. except for the stator winding which reads 1.7 ohms instead of the specified .37 ohms. Any thoughts on this? The speed control board test was passing 120v until I got to the test for pin 3 of the 9 pin plug to pin 4 of the...

View more questions Search