Ask Experts Questions for FREE Help !
Ask
    dweatherma's Avatar
    dweatherma Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 11, 2007, 03:41 PM
    Safety switches on riding mower
    How and where do you locate the safety switches on a Power Kraft riding mower?
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
     
    #2

    Sep 11, 2007, 05:56 PM
    There will be one for the neutral position, the blade engagement, and the seat.
    The seat switch is under the seat. The blade engagement will be under the frame usually. And the neutral position switch will be on the clutch/brake assembly underneath the frame, this is also the clutch / brake safety, so it will start in gear also, if the clutch / brake is depressed.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2005 Huskee riding mower PTO won't engage and mower dies [ 12 Answers ]

Replaced battery with new one, within several starts the new battery was drained. Mower will start by jumping but only runs a few minutes then dies, also the PTO will not engage at all (replaced PTO switch and still won't engage) does not even attempt to engage, as if there is no power to the...

Where are safety switches on lawn tractor? [ 3 Answers ]

Have seen numerous replies saying to check safety switches on riding mowers if they won't start. Where would mine be on Weedeater Lawn Tractor Model HD12538D. And HOW to check each one?Thank you!

Diagram for replacing lawn mower belt on Toro 1744HXL riding mower [ 1 Answers ]

I need a diagram for replacing the belt in the mowing deck of a Toro 17-44HLX riding mower

Safety Switches on MTD Lawn Tractor [ 6 Answers ]

I have a model 13Bi675H062 Lawn Tractor. It will not start and I have been told that the solenoid needs replacing. I purchased one today. Yesterday someone got it to crank by jumping it on the solenoid that is in it but when I put it in gear to go forward, it would not stay cranked. The...


View more questions Search