Not your question?
  Ask your question
  View similar questions
   
  
 Add your answer here.Check out some similar questions!
Running two 100 amp main panels from a 200 amp service
 [ 27 Answers ]
 Greetings! I live in a rural country area. The electric company will be installing a pole, meter, and 200amp service with disconnect at pole. (It will require 50 foot run of service cable from pole to main load center in mobile). Currently the double wide has a General Electric 100amp Main... 
400 amp service, 2 200 amp panels, 320 amp meter socket
 [ 10 Answers ]
 Hi, this is my first post here, but I have been reading a lot and have already learned a bunch. I want to thank TK already and hope you reply to this. I am in the process of designing my electrical system for my new home. I have some electrical experience, but am by no means a pro. I am... 
400 amp service with 2-200 amp panels & 320 amp socket
 [ 6 Answers ]
 Hi TK. I am running 400 amp service into my new contruction home. The electric compnay is running a single 400 amp line to the meter. I have to split it to the two panels at that point. You had told me once before that I need a 320 amp meter socket and then run 2-200 amp lines to the separate... 
200 Amp Service Panel with 60 Amp Main Breakers
 [ 26 Answers ]
 I was told when we purchased our house that it had 200 Amp service which it appears to be; however, the top of each bus bars only has 60 Amp breakers for the Main shut offs. Is this normal? Each bus bar is connected to a hot wire (one red and one black) and then the two 60 amp breakers are... 
100 amp service vs. 200 amp service
 [ 5 Answers ]
 
The house I just bought was built in 1952. It's a 3 bedroom, 1 bathroom with the standard screw in fuses (total amps unknown). Presently I'm doing a remodel. Adding a third bedroom & extra bathroom, washer & dryer, dishwasher, newer & larger refrigerator, bigger microwwave, probably 3 window air... View more questions Search 
  |