 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
OK now the motor went out again!
OK I put the capasitor in. and now it starts on its own. Were is before I had to give it a push but, it runs for a couple hours and goes out. I ran down this last time and the motor was cool as a cucumber. Now what? Thanks... is a 15 year old carrier.
|
||||
|
||||
|
Something is causing the motor to shut down. It still could be the motor or another component in the unit. Now is the time to take your meter and check for power when the unit has shut down. Back track from the motor whatever controls are in the circuit to find the reason for the shut down. This is not fun and can be time consuming but it is the only way to fix the problem. Sorry but this is the only option I could see since you already tried the capacitor.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
:confused: I have three Hampton Bay 52" fans in my lanai. They are three years old. Recently, one stopped working but the light kit functioned properly. I thought the switch has most likely worn out. Upon reaching up to begin disassembly, I discovered the motor and fan blade connections were so hot...
My blower motor for my furnace is not spinning. I opened up the cover and asked my wife to turn on the AC. When she turned it on,the motor just made a humming sound, but the cage did not spin.When I touched the motor it was pretty hot and there was a faint burning smell. Do I need to buy a new...
I'm having only a single phase supply. How can I run my 3phase motor without using A phase converter?
I have a GE motor that I believe is from an old washer. It has 5 wires. Black to white is 0 ohms, red to white or red to black is 3.9 ohms, yellow to blue is 2.0 ohms. There appears to be "no" centrifugal switch, so I don't think it's a capacitor start but with all the wires I think it might be a...
How Do You Rewire a AC Motor that is used on Conveyors?
View more questions Search
|
