Ask Experts Questions for FREE Help !
Ask
    Kdegraw's Avatar
    Kdegraw Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 2, 2007, 06:02 PM
    Kenmore Elite (110.60932990)
    I had previously posted that I have an elite that is working but no heat. I took the element housing to a local service center and all continuity was in tact. We replaced the thermoster and thermal fuse. He had problems getting it going again, but it was the door switch. We still have no heat. Any other suggestions.

    Thank you in advance...
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Sep 2, 2007, 06:19 PM
    Can you see the element glow when in heat cycle? (I know you said it won't heat, but look at elemnt anyway) Do you have voltage to the element? Is the blower motor working? Check these and post back for further help
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Model # of Kenmore Elite Catalysts Washer set to Kenmore 110.60936990 dryer from 1999 [ 3 Answers ]

I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...

Kenmore Elite (110.60932990) [ 1 Answers ]

We picked up a used Kenmore Elite. All of a sudden, no heat. Got the element housing checked, all continuity good. Was suggested to change thermal fuse and/or thermoster along with cleaning out all lint vents and such. All was replaced, now no power. Any suggests

Kenmore Elite MOD 110.22036100 [ 2 Answers ]

Can anyone help me before I have to pay for my service call on Thursday :( The washer is no longer turning on at all. I've reset the fuse box just in case, made sure that there is power in the outlet; I've unplugged the washer hoping that it would reset; also took the electronic panel off and...

Washer Kenmore Elite Model 110.23022101 [ 2 Answers ]

Hello, My Kenmore Elite washer made a loud clicking noise when it got to the spin cycle. It appears that it will not spin or agitate. It will drain. Any thoughts before I call a repair man?

Kenmore Elite Model 110 [ 1 Answers ]

The washing machine is not spinning, so I am attempting to replace the coupler. I am able to partially remove the front console, but I can not remove the main knob. I found instructions that say to hold the dial and turn timer knob counter clockwise, but this is not working. This should be...

View more questions Search