Ask Experts Questions for FREE Help !
Ask
    Oneill474's Avatar
    Oneill474 Posts: 427, Reputation: 2
    Full Member
    		  
    #1

    Aug 24, 2007, 12:57 PM
    Sprinkler pump
    Broken sprinkler pump has been removed. But the power line is still there. It
    Runs to a 30amp breaker. The wire is short, I would have to extend it to the pump
    Perhaps 20”. The wire is very heavy gauge possibly 220- 10 gauge and difficult to splice.
    Is there an electric fitting to join two heavy gauge wires together
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Aug 24, 2007, 03:01 PM
    What kind of wire or cable do you have? Each type has it's own unique connection method and set of materials.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

In ground sprinkler pump [ 1 Answers ]

I had a 220 pump on my sprinkler system and it died on me. I ordered a new one from a company and they sent me a 110 pump. I called them and the said " were sorry we only make them in 110. Here my question how can I take the 220 and drop it down to a 110/115 . To make my new pump work? Do I...

Priming Sprinkler Pump [ 2 Answers ]

I have just replaced my 2 hp sprinkler pump and all of the line leading from the ground. I did replace my check valve. I cannot get my pump to prime. I did check for air and I did fill the pump with water. I have done this before with no problems except for changing the check valve. Any...

Sprinkler pump [ 4 Answers ]

My sprinkler pump works fine I have good pressure but the pump makes a loud screaming sound. I think my neighbors are upset with me. How can I fix the problem?

View more questions Search