Ask Experts Questions for FREE Help !
Ask
    dday's Avatar
    dday Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 9, 2007, 10:06 AM
    Installation of used above ground pool - 2 questions
    A 5 year old above ground pool was given to us. We have hired a pool company to install it. There is some rust on the metal frame which was a concern to us. The man we have hired said that he will treat it with wall foam which should eliminate future rust. Does anyone know anything about this? Secondly, the frame was put up yesterday and it was installed upside down. The installer says that this won't make any difference, but I am wondering... Any help will be greatly appreciated!
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
     
    #2

    Aug 11, 2007, 09:09 PM
    Um, in the future you may ask for references about the hired hands you hire. And I believe I would tell him where he could stop at, which would be right then and tell him not to come back. I just don't like the sounds of his theories.
    The Pool Guy's Avatar
    The Pool Guy Posts: 14, Reputation: 2
    New Member
     
    #3

    Aug 15, 2007, 06:24 PM
    Quote Originally Posted by dday
    A 5 year old above ground pool was given to us. We have hired a pool company to install it. There is some rust on the metal frame which was a concern to us. The man we have hired said that he will treat it with wall foam which should eliminate future rust. Does anyone know anything about this? Secondly, the frame was put up yesterday and it was installed upside down. The installer says that this won't make any difference, but I am wondering... Any help will be greatly appreciated!
    Wall foam will not stop the pool wall from rusting... any rust on a pool wall is bad news. I would think twice about paying for the install and new liner on a rusty pool ! Also, what type of above ground pool is this ? Round,oval or rect ? If your frame (track) is upside and the installer says its OK... tell him to take a hike ! Hope this answered your questions...

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Above ground pool installation [ 5 Answers ]

Hi all, We are installing an above ground pool, we got the ground level and the day of installation it downpoured rain. Now the area where the pool is being installed is wet very very wet. We have clay in the area to top it off. We have been waiting for the ground to dry for 2 days now. The...

Above Ground Pool Questions [ 24 Answers ]

I am about to purchase an 18' Above Ground Pool. Part of the deal was that I go to the sellers house to dissassemble and remove the pool (it will be drained). Is this something that can easily be done by two-three people with average skills. This means I have done some home improvement stuff like...

Install New Pool Liner-Above Ground Pool [ 1 Answers ]

We are going to install a new liner in an above ground pool this weekend. I have read conflicting information as to when the skimmer and jet holes should be cut. Do you fill the pool with water within a foot of the skimmer, attach the trim kit and then cut out the liner? I don't know what to do,...

Above-ground pool installation [ 2 Answers ]

I have recently purchased a Muskin 18' round above ground pool from a friend; however, the instructions on the pool assembly can not be found. She didn't install the pool so she can't provide any advice on taking the pool down. I have searched the internet extensively for instructions with no...


View more questions Search