Ask Experts Questions for FREE Help !
Ask
    tcjhbergman's Avatar
    tcjhbergman Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 14, 2007, 11:02 AM
    Flange extension
    I am laying tile in my bathroom and have the flange extension kit with the 1/4 and 1/2 inch extensions. How high should the flange be above the new tile?
    stew_1962's Avatar
    stew_1962 Posts: 255, Reputation: 10
    Full Member
    		  
    #2

    Aug 14, 2007, 05:17 PM
    Either flush or just slightly proud of the tile. 1/8 - 1/4 inch, no more.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What height should the Closet Flange Extension be, from the top of the tile/floor? [ 5 Answers ]

I got a “Closet Flange Extension Kit” from Home Depot and it has 2 rings. One is ¼ inch and the other is a ½ inch; so basically I want to know which one to use. The current/original flange that is installed on the sub-floor is level with the top of the tile. The tile is just that 12” square...

Cast iron toilet flange the bolt holes will not hold how do we fix it and the flange [ 1 Answers ]

We have a cast iron flange and the bolt holes are not useable can we cut off the top and add a new plastic flange

Toilet flange extension [ 7 Answers ]

I'm remodeling my bathroom and in the process of leveling the old floor I'm raising the floor 3 inches. I need to extend the old cast iron flange up that much, what's the easiest way to go about this? I bought a PVC replacement flange that adapts to cast iron and seals with a rubber gasket but I...

View more questions Search