Ask Experts Questions for FREE Help !
Ask
    quasiomo's Avatar
    quasiomo Posts: 12, Reputation: -1
    New Member
     
    #1

    Aug 10, 2007, 02:18 AM
    Dvd-ram burs dvd, but does not burn cd!
    Hello everybody.
    Here is my problem, I have a toshiba equium laptop that has a mata dvd-ram uj-8415 and windows professional installed on it. The thing is that a can burn dvds with out a problem but I can't burn any cds. Now a have tried different brands of cds: tdk, philips, sony, etc. I have tried different applications as well like nero, sonic record, even easy extractor or ultraiso. The burning process starts, it reaches to about 10 present and then a get the error message, either the cd is not good or with nero a sequence number. I tried everything that I could think of, search the internet but couldn't find anything conclusive.
    Since I can burn dvds I'm thinking that is not the physical drive, and I did install some new applications a while a go. I do have to mention that the problem appeared out of nowhere.
    When it comes to playing dvds or cds, I don't have problems. I can play anything.
    Please help my... I don't want to install everything from scratch!!
    benn11's Avatar
    benn11 Posts: 1,036, Reputation: 43
    Ultra Member
     
    #2

    Aug 10, 2007, 03:50 AM
    Are your dvd-cd drivers properly installed? Because it could mean that you installed only DVD drivers but not the CD drivers. Get drivers here
    retsoksirhc's Avatar
    retsoksirhc Posts: 912, Reputation: 71
    Senior Member
     
    #3

    Aug 10, 2007, 07:54 AM
    I BELIEVE (someone correct me if I'm wrong) that drives use different lasers for burning CDs than they do for DVDs. If that's the case, it may be that the laser for burning CD's is either dirty, or defective.
    Curlyben's Avatar
    Curlyben Posts: 18,514, Reputation: 1860
    BossMan
     
    #4

    Aug 15, 2007, 10:01 PM
    retsoksirhc, same RED laser is used for both processes, but I like you idea of cleaning.
    I have had a similar problem, but would burn CD's and NOT DVD's, a clean fixed it.

    It's certainly worth a try.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dvd compilation burn missing audio track [ 6 Answers ]

Hi, can anyone out there can help me? I've used Nero VisionExpress 2 for some time to burn movies (along with DVD Shrink) with no problems... until.. tried to burn a compilation of four short dvd movie clips. Seemed to burn fine - picture is fine but there is no audio. Any ideas about what I've...

Any Software to Burn DVD with CD Writer? [ 2 Answers ]

Folks, I'm looking for any software which can burn DVD images using CD-Writer. I have a CD-Writer. Cheers! -Just.

Burn 2 TV episodes onto 1 dvd [ 2 Answers ]

Have tried to burn 2 episodes of a TV show to 1 dvd without success. I recorded both episodes using a dvd recorder(similar to vcr recorder, note-no hard drive) copied them to the hard drive of my computer (placing in different folders) This was OK. Then I tried to copy both folders to 1 dvd...

Can I burn music to a dvd? [ 10 Answers ]

I was just wondering if I could burn music (and if so, how much?) to a dvd. I have Nero Express 6, and I want to burn a 3 gig music folder, but CD-Rs only hold 70mins or 700mb, which isn't enough. Any help would be very much appreciated! :D

Connect 2 computers to burn a dvd... [ 2 Answers ]

I am attempting to connect 2 computers to burn a dvd. I think(? ) w/ a crossover cable I can figure out how to make the connection. Why am I doing this you ask... PC1 (running Me) has the dvd burner & software but is FAT32. Figured this out when the downloading 6.1GB .img got error message at...


View more questions Search