Ask Experts Questions for FREE Help !
Ask
    nstywarrior's Avatar
    nstywarrior Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Aug 6, 2007, 09:22 AM
    Briggs interchangeable shafts?
    Does Briggs make a shaft conversion from 1" straight keyed to a tapered shaft? It would be for a Vanguard 18HP engine.

    Thanks,
    John
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Aug 8, 2007, 04:28 PM
    Not to my knowledge they do not. Go to :briggsandstratton.com
    And try there.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Clear/white hard stuff on root of pubic hair shafts [ 10 Answers ]

Hey all, For the past year after I first shaved my pubic hair area I have been getting frequent redness and bumps in my pubic hair area. Sometimes I will get pimples that last for several does and once in a while I will get larger things that resemble boils. However recently I've been...

14/hp briggs [ 2 Answers ]

Hi i am trying to repair a 14/ hp briggs motor. This motor has ohv where i have never had a chance to work on i am from old school and not used to this newer equipment. Here is the problem first he carb was overflowing with gas i took it apart and cleaned everything with parts cleaner and hoped i...

Interchangeable Briggs & Stratton Motors [ 3 Answers ]

I have a Murray riding mower with a locked engine and would like to replace the engine with one that came off a Lowe's mower. They are both 14.5 hp OHV mowers and their model numbers are similar but not exact. It appears that the engine will mount OK and I am hoping the only difference is in the...

12.5 briggs [ 1 Answers ]

I have a 11hp rear engine snapper. The motor shut down on me so I took it off and replaced with a 12.5hp. The only 2 wires the 11hp had was a starter wire and another that went inside the lid. This 12.5hp has those 2 wires plus 2 more that are both coming out of the side together in the same...

18.5 HP Briggs [ 5 Answers ]

Hello everyone, I have a Craftsman lawn mower with a 18.5 Briggs single cylinder that will not crank over. Have replaced the starter with a new one and it still does not crank over. Someone suggested checking the values and the valves were a little off so we fixed them. Sometimes it will...

View more questions Search