Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Murray rear engine mower, brakes don't work?
[ 1 Answers ]
The clutch works as it should when you depress the brake/clutch pedal, but the brakes don't work. This is my first riding mower and need to know how to repair. Any help would be greatly appreciated. Thanks,
12.5 horsepower brigg and strattion engine on a murray.
[ 2 Answers ]
I just recently put a 12.5 horsepower B&S engine on my murray mower. The original Brigg. 12.5 motor slung a rod. So I put this one on there. It's a little older engine.it has 1wires (one red one) coming out from under the flywheel. And the other one has 2 wires one red and one white. What are...
Removing engine on murray riding mower
[ 1 Answers ]
I have a Murray riding mower. The engine was vibrating and it took me awhile but found two screws missing. I put two back in but engine still vibrate. Further investigation showed that the holes in the engine plate had reemed out and the screws were not holding the engine steady. My question: I...
Murray Riding Mower
[ 1 Answers ]
I have a murray riding mower that I purchased in August of 1991. Apparently I need a new transaxle because it will not go in gear at all. The part # in the book is Dana model 4450-1 which I have been unable to locate, the only reference I have come across for the part says that it has been...
Murray 12.5 Commercial Mower - Briggs Engine - Won't Start/Turn
[ 3 Answers ]
So I'm mowing my back yard with my Murray lawn tractor. I brought it back to the garage and parked it, went inside to cool off, and when I went back out to put it back into the garage, it wouldn't start. I turned the key, and got nothing. The lights work, the battery is charged to 100%,... View more questions Search
|