Ask Experts Questions for FREE Help !
Ask
    rdrswntd's Avatar
    rdrswntd Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 1, 2007, 07:38 AM
    Murray rear engine mower, brakes don't work?
    The clutch works as it should when you depress the brake/clutch pedal, but the brakes don't work. This is my first riding mower and need to know how to repair. Any help would be greatly appreciated.

    Thanks,
    newaukumdon's Avatar
    newaukumdon Posts: 525, Reputation: 44
    Senior Member
    		  
    #2

    May 1, 2007, 10:50 PM
    Look under the back and you will see a bar that moves a lever on the transaxle, there is an adjustment.

    Don
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Murray Riding Mower [ 3 Answers ]

My 1988 Murray mower worked fine last week... but I jumped on it this week and couldn't get it to turn over. Replaced the battery, but that didn't seem to help. Tonight I replaced the solenoid tonight, but that didn't seem to help. I'm getting nothing when I try to turn it over. Any advice? This...

2000 murray mower [ 1 Answers ]

I need a diagram for drive belt for model # 42572X8A

Removing engine on murray riding mower [ 1 Answers ]

I have a Murray riding mower. The engine was vibrating and it took me awhile but found two screws missing. I put two back in but engine still vibrate. Further investigation showed that the holes in the engine plate had reemed out and the screws were not holding the engine steady. My question: I...

Murray 12.5 Commercial Mower - Briggs Engine - Won't Start/Turn [ 3 Answers ]

So I'm mowing my back yard with my Murray lawn tractor. I brought it back to the garage and parked it, went inside to cool off, and when I went back out to put it back into the garage, it wouldn't start. I turned the key, and got nothing. The lights work, the battery is charged to 100%,...

Rear engine snapper stopped moving [ 1 Answers ]

Hi, I have a 14 hp snapper rear engine ride on mower, model 331415BVE, that stopped moving while I was cutting the lawn. The engine runs fine. With the engine in any forward or reverse speed the drive disc engages the clutch disc and disengages while in neutral. When I manually turn the clutch...

View more questions Search