Ask Experts Questions for FREE Help !
Ask
    jessica87121's Avatar
    jessica87121 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 30, 2007, 03:56 PM
    What type of switch can you install in a wooden log
    I am trying to figure out what type of switch or controlled lighting would be best to use on a log cabin where all of the walls are 28" round logs? Would it be best to use ? I'm coming up with a blank. How should I mount the switch, andwhat is the appropriate cover type plate that would go to cover it? Are there any alternatives to the normal type of toggles switch that usually would be used?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jul 30, 2007, 04:02 PM
    Is this a cabin that is already constructed and you are adding switches? If so you may need to run your cable down the chinking crack. I have used my Rotozip to carve out for 2x4 blue plastic receptacle boxes but the cable was already there. You need to dish or scallop out a flat spot for the box and face plate. I have used a draw knife and chisel for the scallop. You can use a standard light switch or dimmer.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #3

    Jul 30, 2007, 04:04 PM
    If conventional electrical switches, Could router until plate is Flat against wood.
    Would be good if Trim Carpenter could work with Electrician.
    Low voltage, IR, RF, Phone controlled are other options for control.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Electric stove install wire size/type [ 4 Answers ]

I am installing a Peerless electric stove the plate on it says " Three wire 120/208 volt 60 cycle ac , wattage 8800. I have a GE powermark gold loadcenter with about 10 empty blanks for breakers. The loadcenter is about 75 to 80 feet from the stove location. What size/type wire should I use? What...

Can't locate install.log [ 7 Answers ]

While my son was recently playing a game called Empires, it froze for a moment and he was able to exit the game. From then on, the colors on the screen were all snowy and it isn't using all the colors. Dell support told me I had to go in and uninstall the games he was playing and reinstall...

How do I install in safety overflow switch for ac [ 2 Answers ]

Need help with getting a over flow switch that needs installing on a ac unit. Used to turn off ac if overflow backs up so there is no water damage. Ac is above furnace unit in a hall closset area. Email fd150 at hotmail dot com

Wiper switch install [ 3 Answers ]

I am attempting to remove/install this wiper switch assembly in my 1991 F150. (Please see fig 1). I am somewhat of a clutz, so if anyone could give me a bit of advice I would certainly appreciate it. First, how Would you remove the knob, (Please see fig 2). Next, how do they expect you to...

View more questions Search