Ask Experts Questions for FREE Help !
Ask
    Bscott88's Avatar
    Bscott88 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 26, 2007, 09:55 AM
    PF power failure indicator lights up frequently
    Hi,
    I applogize if this is a repeat question, but I am new to the process. I have a Sears Elite Catalyst Washing Machine that keeps illuminating a PF (power failure) light. I have to keep plugging the power cord in and out of the outlet several times before the washer works. I notice that this is getting worse. I think I spent over 20 minutes last night plugging the power cord in and out of the outlet before it finally worked. My question is, Can you tell me what would be causing this problem?

    Thank you,
    Bscott88
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Jul 26, 2007, 10:35 AM
    It is for power failure. Normally nothing wrong with unit but a loss of supply power. I would check the electrical connection where unit plugs in to. IE. Loose wire or faulty switch.Good Luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Boot failure after installing new power supply [ 1 Answers ]

Hello, I purchased a new power supply today and swapped out the factory installed unit in my Dell XPS whatever. The new supply is 550 watt, whereas the old one was something like 340. In any case, the computer will turn on briefly (about 1 - 2 seconds) and then everything shuts down. This is...

96 Civic dash lights failure [ 2 Answers ]

Recently I was driving at night and my dash board lights went out (head lights still on). I messed with the dimmer switch for the dash lights and they came back on. The next time I drove they went out again and I couldn't get them to come on again. Now I have the dimmer set to max (meaning I...

Indicator lights on Hotpoint Range [ 1 Answers ]

Hi, We picked up a used Hotpoint range the other day. After plugging it in we tested the oven and the burners. Everything seems to be working fine except for the indicator lights. When the oven dial is set to OFF, the oven indicator light turns on. When the dial is set to anything else (BAKE,...

View more questions Search