 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Wiring ceiling fan
I am replacing a ceiling fan. It has 3 wires in ceiling, white, red and black. The fan I am relacing the old one with does not have pull chains. It has a remote box that mounts with the fan. There are only two wires that match to the ceiling side the white and the back What do I do with the red wire? There are four wire on the other side of remote reciver that match to the fan itself white black blue and orange.
|
||||
|
||||
|
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Changing a existing fan with 2 switches one for light and one for fan. Ceiling wires are black, red ,white ,ground. New fan has black,white,ground.not sure how to wire it up.:confused:
I am attempting to install a hampden bay minuet 2 fan. The prexisting ceiling wires consist of two black, two white, 1 red, and my ground wire. A basic lite fixture was installed previously and controlled by a single wall switch. The wall switch has 1 red on the bottom and two black on the top...
Hello, I have a outdoor ceiling fan with Light kit (black, white & blue wiring coming from fan) From my ceiling box I have three blacks and three white wires along with the grounds. Need help on how to connect the fan wiring to the ceiling box. Thanks!
I have a ceiling fan, I think it’s make by Hunter. We had some ceiling painting done and the painters broke the fan reversing switch pull chain, and then they made matters worse by removing the switch without marking the wires. This fan's reverse switch has a pull chain, the first pull turns...
I am trying to install a ceiling fan in my room, there is a green wire coming out of the fan that is supposed to be connected to a ground, there is only two wires coming out of the box in the ceiling a white wire and a black wire, what do I need to do with the ground coming out of the fan?
View more questions Search
|
