Ask Experts Questions for FREE Help !
Ask
    fannymae's Avatar
    fannymae Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 11, 2007, 06:49 AM
    100A Service
    How do I Install a 100 amp single phase three wire service?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Jul 11, 2007, 04:04 PM
    There are too many variables to explain, too many code issues that need to be addressed with sizing and the installation. It wold be better if you came here with some knowledge of installing a service and have specific questions.

    Sorry.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring from 200a box to 100a "" at distance of 40' [ 3 Answers ]

I am renovating the interior of my garage and I would like to put in place a 100a box. I am to be wiring from the existing 200a box which is located 40'+ from this garage. The 200a box is in a single unit with the meter. I would like to know if I should run it underground (if so, what wire type,...

New 15A breaker trips main 100A breaker [ 6 Answers ]

Hi, I've been finishing my basement and I added a few 15A breakers One room has 8 outlets in series with the first starting about 6 feet from the main panel. There is currently no load on this outlets. When installing the drywall I accidentally shorted the outlet closest to the panel. It...

100 amp service vs. 200 amp service [ 5 Answers ]

The house I just bought was built in 1952. It's a 3 bedroom, 1 bathroom with the standard screw in fuses (total amps unknown). Presently I'm doing a remodel. Adding a third bedroom & extra bathroom, washer & dryer, dishwasher, newer & larger refrigerator, bigger microwwave, probably 3 window air...

Changing from metered service on my shop to service from my house. [ 2 Answers ]

I’ve had the meter and 3 wire service cable removed from my shop. I’ve purchased 90 feet of 100 amp direct burial cable to run from the lower section of my home meter to my shop. Not being an electrician, I’m still trying to install this changeover. The direct burial cable has 4 wires. 2 larger...

#00 to 100a breaker [ 1 Answers ]

A friend of mine ran #00/3 from his house to his garage, but only wants a 100a service. What can I use to hook up #00 to a 100a main breaker, because I don't think the physical size of the wire will fit under the lugs in the breaker. Also I plan to run a #6 to a ground plate buried 3' outside the...

View more questions Search