Ask Experts Questions for FREE Help !
Ask
    eje303's Avatar
    eje303 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 2, 2007, 09:40 PM
    Rth230 rheem furnace
    I am having trouble with the wiring of this stat. I have the rc and rh jumped and connected to are on the furnace and w to w, y to y, g to g.
    I have the out door unit connected to why and c.
    Here is the problem when set to cool after delay furnace kicks on and so does condensing unit but after that the burners come on as if in heat mode. It is an older rheem furnace and it never had a/c before please tell me if I'm doing something wrong
    Thanks ed
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jul 3, 2007, 01:35 PM
    Look at the beginning of this board for the sticky notes on proper thermostat wiring ETC. See if that helps you. If not post back.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Rheem criterion furnace [ 3 Answers ]

My air went out yesterday and I don't what to do... the motor outside is not working but the inhouse fan is work air is coming out of the vent but it is not cool. This happened in the winter and we had the heat ignaitor replace... help?? it 98 degree today

Rheem gas furnace slow to light [ 3 Answers ]

I have a Rheem model RGEB gas furnace this is a 90+ about 18 yrs old, the problem I am have is that the hot surface ignitor will come on and glow, but the gas valve will not turn on and after a few seconds the ignitor will cycle off, this will happen a few times and then the furnace may start. It...

Rheem 90 plus furnace [ 1 Answers ]

Installed in 2004. Just before the fan comes on the furnace bangs/clunks - sound like someone hitting pipes with a wrench. We have had trouble with ignition. Could this be related? If not, any answers?

Rheem furnace not coming on [ 3 Answers ]

I have a Rheem Criterion II Plus 2 Two-Stage 80-Percent furnace purchased August 2005. The problem is that the thermostat clicks to come on and displays heat on, but the furnace does not do anything. I have tried turning up the heat many degrees past the inside temperature but still the furnace...

View more questions Search