Ask Experts Questions for FREE Help !
Ask
    thelaugh's Avatar
    thelaugh Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 29, 2007, 08:06 AM
    Is it 110 or 220?
    Hi,

    I had 2 outlets installed where there were once a heater and its thermostat. The light on my voltage tester is on for both, but when I plug a clock radio (110) into either new outlet, nothing happens. Is it possible that these new outlets are wired at 220 to accommodate the heater that was removed? What's a good way to verify if these outlets are 110 or 220? I never bothered to look closely at the heater when I chucked it last fall.

    Thank you!

    Tony
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Jun 29, 2007, 12:49 PM
    Testers with only lights are only for warning of voltage. The only method will be to use a volt meter of some sort.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #3

    Jun 30, 2007, 06:48 AM
    The thermostat in one box, may have controlled power to second box. You will need to verify.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

220 to 110 [ 7 Answers ]

I'm wanting to run a 110 outlet off my 220 serface unit how do I go about doing this?:confused:

110 to 220 [ 5 Answers ]

We need an outlet that needs to support 220v 27.4 amps. Ihave 2 120 lines at that location both with 20 amp breakers. Could I just use those lines connet them to the new outlet 2 hots and 1 ground. Then get a double poled breaker in place of the other 2 breakers. If so on the new dbl breaker...

110 vs. 220 wiring... [ 7 Answers ]

I bought a table saw at an estate sale. I got a good deal on it! I noticed after I got the saw home (I looked at it before I bought it, but didn't look close enough) and realized the plug appears to be a 220 plug. This won't work for me as I'm limited to 110; I'm a renter. The plug has 3...

Changing motor from 220 to 110 [ 3 Answers ]

I have an old Sears radial arm saw that I changed to run on 220V from 110V some time ago. I am now in a situation where I don't have easy access to 220V and need to change it back to 110V, but I can't find my manual. I see where the wires connect to the switch, but I don't see where I can move...

Getting 110 from 220 [ 3 Answers ]

I have a 3-wire 220V going to my well house. I am wanting to come off the 220 to a 110 outlet. I realize this is not the safest thing to do but it is only temporary. My question is, I know I use one wire so I cut let's say the white wire and connect it to one side of this GFI outlet, Do I connect...

View more questions Search