Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue.
[ 11 Answers ]
I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -
No heat, freezing!
[ 1 Answers ]
Furnace doesn't start Tried everything, the fan starts but there is never a flame. After 15-20 seconds I hear a click but then nothing and afte five minutes the fan also stops What to do ///
Heat pump stuck in heat mode
[ 4 Answers ]
I have a heat pump that seems to be stuck in heat mode. When you try to turn the a/c on it runs heat. I got the a/c to run by cycling the power a couple of times but after having to use the heat again, it is stuck again. Could this be an electrical problem or is it probably the reversing valve?
Central heat freezing up
[ 5 Answers ]
My central heat runs for about 8 hours and thin freezes up with about 3 inches of ice around the whole thing
Electric heat pump auxilery heat problem
[ 4 Answers ]
Equipment: Trane XL1400 4 years old Auxilery heat: Strips... 2 -60Amp circuits Filters changed every 30 days I cleaned outdoor unit summer 2006, as every year. Thermostat: Honeywell Chromotherm II Problem: I have been noticing at times the aux heat kicking in at times I think it should not.... View more questions Search
|