Ask Experts Questions for FREE Help !
Ask
    aramos's Avatar
    aramos Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 23, 2007, 01:08 PM
    Electrical Fan
    Hello,

    I'm connecting a ceiling fan with light and the wires coming from the ceiling is BLACK, WHIte and RED and the wires coming from the fan is BLACK WHITE and BLUE. How do I connect the wires? I already connected the ground wire to the brachet that's screw into the metal electrical box.

    Thank you,

    Best regards,

    Abner
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jun 23, 2007, 01:15 PM
    Probably, White to white, black to black, and red to blue.
    If switches or controls reversed(light switch controls fan and, fan control works light), then, swap black and red.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    Jun 25, 2007, 01:26 AM
    Sounds good to me.

    Ceiling fan wiring - Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay Remote Ceiling Fan - light works - no fan [ 2 Answers ]

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

Hampton Bay Ceiling fan: fan speed pull chain [ 2 Answers ]

The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it?

Ceiling fan Electrical [ 1 Answers ]

I have a ceiling fan with a light kit, all controlled via a remote. One night I went to turn on the light with the remote (ceiling fan running) as I have done many times, and one of the light bulbs burned out. I replaced the bulb and now the remote will not operate the lights – they either are on...

Electrical hookup at switch with installing ceiling fan. [ 1 Answers ]

I've installed the ceiling fan with the light. I need to know what the correct color code connection is for the wall outlet. I have a switch for the fan and a switch for the lights. I also need to know the coding for the switch for the outlet on the other side of the room. How do I wire the...

Electrical Installation of Bathroom Extractor Fan [ 3 Answers ]

Hello I'm about to replace an old timer bathroom extractor fan with a modern one. The old one is fed by a three core and earth cable, the third (yellow) core presumably being the connection to the pull cord switch. I haven't yet been into the loft to check exactly how the wiring was installed. ...

View more questions Search