Ask Experts Questions for FREE Help !
Ask
    JGarver1's Avatar
    JGarver1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 17, 2007, 09:22 AM
    Kenmore He3 dryer electrical cord connections
    I need to attach a four prong electrical cord to a Kenmore HE3 dryer. Where do the wires attach?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jun 17, 2007, 09:32 AM
    Red and Black go to outer terminals,
    The're probably is a strap connecting center terminal to chassis for ground. Remove strap.
    White goes to center terminal, and green goes to chassis for ground.
    egailc's Avatar
    egailc Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Jun 19, 2007, 09:55 AM
    On a four wire cord just use the color code, white to white, red to red, black to black and green to metal frame. If the green wire is already on center or white white,remove it. To be safe, connect that green wire you took off white screw and put it together with the green wire on the cord that you screw to the frame or metal of dryer.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore HE3 Dryer [ 4 Answers ]

Dryer is getting electricity because the lights come on when a drying selection is pushed. The drum will not turn. When I press the start button, I hear a clicking sound and nothing happens after that! What's up with this?

Kenmore HE3 Dryer [ 1 Answers ]

I have had the dryer for about 3 years. When you try to dry clothes as soon as it gets hot it will shut off. I have taken the front off and cleaned it out. However I did not find enough that should cause a problem. :confused:

Kenmore Dryer Elite HE3 [ 1 Answers ]

Opened the door before cycle finished. Will not stop beeping. How do I reset or turn off the beeping?

Kenmore HE3 gas dryer [ 1 Answers ]

I have a model 11092832100 that stop heating. I replaced the thermal fuse and the pilot won't say lit long enough to fire up the heater. Any ideas?

View more questions Search