[scottonthespot]

I have a Frigidaire GLET1041As1 Laundry center (stackable) , It will not dry in one cycle, I have plenty of air coming out the dryer vent, I have replaced the Heater assy. And theromstat. I held the door open and watched it work. What I am finding is the element heats up and cuts off like normal but does not seem to come back on, the one time it came back on it was on for a breaf peroid and cut back off. Now I only stood there for a couple of minutes but it seems like it should have came back on since I had the door open and was letting all that cool air in. Another twist is when the clothes are dryed the second time, it seems like they get pretty warm but not always. The only thing I can see by looking at the diragram is the theral limiter, but I think that either works or it don't. This one has got me?? Thanks for any help!!

[esquire1]

You are correct about the thermal limit. It is in the vent. But you should have more tha 1 thermostat in the element housing. Check them with dryer unplugged and a wire disconnect from them for continuity