Ask Experts Questions for FREE Help !
Ask
    robertedmo's Avatar
    robertedmo Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 11, 2007, 01:53 PM
    Honda A/C Blower
    My 1993 Honda Accord Air Conditioner blows cold air but not enough of it. It isn't very forceful at all, even on high. I replaced the evaporator which was corroded and plugged. This helped, but the airflow is still below normal. Has anyone else had the same problem? What did you do about it?
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
    		  
    #2

    Jun 11, 2007, 06:29 PM
    Where do you and your car live? In some areas, debris gets caught in the air conditioner/heater's air intake ( the screen between the hood and the windsheild, under the wiper arms)
    Check to see if the AIR door, on the dash, is turned to fresh air not recirculated air.
    Good luck!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honda Civic Blower Motor [ 3 Answers ]

I need to change the blower motor on my honda Civic It us under the dash on the passanger side. It has 3 screws. I have all 3 of them off, but the floor-board is too close to let the motor drop down. And of course the fan is attatched to the motor. How do I get the motor out?

Remove knobs - honda hs35 snow blower [ 9 Answers ]

My aged Honda HS35 Snow Blower runs like a dream and usually started at the first pull. However, the sort of u-shaped wire at the bottom of the Choke Knob shaft somehow came loose from wherever it is supposed to connect to. The wire is still connected to the Choke Knob shaft at the other end. I...

Honda accord blower motor [ 1 Answers ]

I am having a problem. I cannot remove the blower motor housing on a 1990 honda accord. If anyone can give me a step-by- step . It would be greatly appreciated.

View more questions Search