Ask Experts Questions for FREE Help !
Ask
    jmack151's Avatar
    jmack151 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 10, 2007, 05:33 PM
    How do I install the receiver for my ceiling fan?
    I can't for the life of me figure out how to get the receiver mounted on my hampton bay ceiling fan. I have tried every direction, but the canopy cover won't fit over the thing. Help!
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #2

    Jun 10, 2007, 05:50 PM
    They can be about impossible for the most experienced. Have breaker off, work with 1 wire at a time, store anywhere but in the way. Good luck. Take your time.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #3

    Jun 10, 2007, 06:47 PM
    Try this:

    https://www.askmehelpdesk.com/electr...fan-28381.html

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Install Ceiling Fan- Coler of wires [ 1 Answers ]

I need help to determine which wires I need to connect while installing a ceiling fan. The Fan has a Black, Blue, white and green wires. The wires in the ceiling are Black, Red and White. My question is... the black was capped off and not being used. The red was connected to the light...

Hampton Bay Ceiling Fan need instructions on how to install [ 2 Answers ]

I have a Hampton Bay Ceiling Fan that is 10 years old and has never been used. It also doesn't have the instruction manuel detailing how to install it. Is there anyway to get that information?:confused:

Attempting to install ceiling fan in older house [ 6 Answers ]

I'm attempting to install a Hampton Bay 42" ceiling fan but I'm having some weirdness with the house wires. House wires are: 2 white (attached to current light fixture) 1 red (attached to current light fixture) 2 black (capped off) The ceiling fan has the following wires: 1 black (fan...

Ceiling fan install [ 2 Answers ]

I have a hampton bay ceiling fan (PortlandII) that come with a down rod for installation. Is it possible to install w/o the rod? I want it flush with the ceiling. Tx.

Ceiling Fan Install [ 1 Answers ]

Hi, I would like to install a ceiling fan in a bedroom but there is no existing fixture. I'm confident I can get the fan mounted but I'm not sure about the wiring. There is a wall switch that controls the top receptical of a double receptical about 3' from the switch. I have no strong preferrence...


View more questions Search