Ask Experts Questions for FREE Help !
Ask
    shiflet73's Avatar
    shiflet73 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 3, 2007, 12:41 PM
    Wizard mower won't run
    I:mad: have a wizard mower that has been in storage for a year put new oil ,spark plug,belt.new gas. It ran for about 5 min s now it will start and run for a second or two and dies out
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Jun 3, 2007, 12:49 PM
    Drain gas and put in fresh. Also replace fuel and air filters
    mtdowner's Avatar
    mtdowner Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Sep 3, 2011, 10:16 AM
    Carb jets are gummed up.carb needs to be taken apart and jets cleaned.main jet is inside carb bowl,this is likely causing the problem.there is a jet inside of it,I use a small spring that will fit the inside diameter to clean all jet openings.owner of gibson mower repair and lawn care.45 years experience in small engine and 2 cycle engine repair.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lawn Mower Cutting Deck Wizard [ 2 Answers ]

Is there a way to adjust the wheels to tighten the drive belt for a 42" cutting deck? So far I have been replacing the belt every year this year the new belt will not turn the blades.

Wizard Riding Mower won't start [ 4 Answers ]

Bought at a yard sale. Works like a charm but I got up out of the seat while it was running - and the blades were engaged. It died, but now I can't get it to start. I've disengaged the blades, it's in neutral. I push the clutch and turn the key, but nothing happens. When I bought it, I...

Craftsman Mower won't Run on Hills [ 4 Answers ]

I have a craftsman lawn mower and it will not run on a hill. There was gas coming out of the intake when it was on a hill which makes me believe the bowl is overfill. I do not see any way to adjust the float. Any suggestions?

My snapper mower won't run right [ 1 Answers ]

I have a snapper riding mower the thing runs but it isn't running right I need help on how to adjust the carb on this stupid thing

Wizard lawn mower neutral [ 1 Answers ]

How do I get a wizard rider,probably in the 1990-1996 model year range, appears to be hydro drive, to free roll? I've put the F-N-R levr in the "n" position, and moved the speed selector to various position, but still no roll... I know some hydro's have a release valve lever on the rear...

View more questions Search