Ask Experts Questions for FREE Help !
Ask
    greatime's Avatar
    greatime Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 25, 2007, 04:44 PM
    Sears belt replacement VYT4000 21V-Twin 42"
    Need information to replace the belt on Craftsman Riding Lawnmower.
    It is the Bob Villa Signature Series model #917.274033. Thanks for your help.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    May 26, 2007, 09:58 AM
    You have three belts on your mower which one needs replacement? The deck belt you'll need to pull on the tensioner pulley tyo get some room. The belt between the engine and the deck you need to disengage the belt and the drive belt you need to fully depress the clutch/brake.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

MTD deck belt replacement how to [ 5 Answers ]

Hi. I have got a problem with the deck belt on MTD Model 14AS84AH062. I have a new replacement belt but the problem is, I did'nt see how it was before it broke. At the end of the one side there is a thing that has a thin cable running from it, and I can't seem to understand were that has to...

Smell of burning rubber after changing drive belt on Sears Garden Tractor [ 3 Answers ]

I changed the Motion Drive Belt on my 20hp 1999 Sears Garden Tractor. After changing, tested it, and it has plenty of "pick up" and runs good. However, after a minute or two, smell burning rubber. Is this normal, perhaps a "break in" period, or is it likely I have done something wrong?

Old "sears" furnace [ 1 Answers ]

Sears furnace model 867.763271 How old may this unit be? Who manufactured furnaces for Sears of this vintage? This a standing pilot unit and I am guessing at least thirty years old?

Felt "belt-like" piece came out of dryer [ 1 Answers ]

What does it mean if the felt piece that is like a long belt, comes out of your clothes dryer?

Belt replacement problem [ 2 Answers ]

I finally got my deck straightened out but the replacement belt I got from ACE hardware seems too long (original # 754-0371A). They gave me a belt numbered 954-0371A and told me it was the same belt. Now I have to drop the deck to change the new belt out with the correct one. My question is did...

View more questions Search