Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing Barrel Trap from Tub/Shower
[ 1 Answers ]
Hi, I'm in a pickle and am not sure what to do. I've got a drum trap that began leaking at a solder joint to it. I've looked around for a replacement, but they're hard to find. I want to replace it with a typical P trap, but I have a question about how to go about it. The existing picture...
Bath tub
[ 1 Answers ]
How do I resurface my porcelain bath tub?
P trap elbow for tub
[ 2 Answers ]
Hello, I am installing a new tub and the PVC waste drain has an elbow directly below the tub with a screw on fitting in the elbow. I am assuming this is the p-trap. Will this leak if I simply tighten it? Do I use any kind of glue or putty or teflon tape in this area? It seems like simply...
Leak from tub drain... possibly trap?
[ 3 Answers ]
My wife was getting a shower today. I was in the kitchen and I noticed a leak in the ceiling. To describe the leak its as if someone poured a cup of water, stopped, poured it again, stopped and that was it. I yelled up to my wife and she turned the water off. I checed out the drain at the front...
Tub drain to P trap
[ 2 Answers ]
Hey, I am replacing the tub in my bathroom, as well as much of the drain line. I am replacing the galvanized(?) pipe and drum trap with 2" PVC, a Vent, and a P-Trap.. my problem is how do i install the Tub drain to the P-trap. The tub drain assembly is 1 1/2" or so.. and the P-Trap is 2".. I got a... View more questions Search
|