Ask Experts Questions for FREE Help !
Ask
    helomech's Avatar
    helomech Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 23, 2007, 11:20 PM
    Nothing works
    I tired it use my A/C and it would not come on. No fan, no condenser, nothing. Then about 2 weeks later it just kicked on like nothing was ever wrong, it worked just fine for about 3 days. Now, again nothing is working. I can't get the heat, A/C, or fan to kick on. Sometimes the thermostat will make the clicking noise, sometimes it won't. The thermostat is only about 6 months old. Anybody got any ideas?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    May 24, 2007, 12:26 AM
    Check the circuit breaker for the furnace and A/C. Check the fuses outside for the A/C.
    helomech's Avatar
    helomech Posts: 2, Reputation: 1
    New Member
    		  
    #3

    May 24, 2007, 02:31 PM
    That was the first thing that I checked. Could it be the wiring between the thermostat and the units? If so how would I go about checking them?
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #4

    May 24, 2007, 02:58 PM
    Turn on the thermostat and wait for the delay. See if you have 24 volts to the green and yellow terminals in the furnace, I'm going to take a guess the problem is a loose connection in the stat' check the red wire good.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I do everything right! Nothing works! [ 8 Answers ]

Hi I am very active. I do interval walking and climbing 30-45 min at 7 am. Then off to the gym where I do another 45 minute interval training on eliptical or bike or tread. I do weights every day alternating between upper and lower body. I then take a 2 to 3 mile walk in the afternoon with my...

Ms works database to ms works spreadsheet [ 2 Answers ]

Have tried copy/paste but I get a message stating "make sure the destination area is as large as the info you wish to paste" .Anyone help please?

Ms Works Database [ 3 Answers ]

I am using ms works database but the only way I can add the contents of a field is by creating a report.Anyone help me please there must be a shorter way.:)

Fan works but light doesn't. Fixed and now the light works but fan doesn't [ 9 Answers ]

While I was at college somehow my fan stopped working. There is absolutely no explination from anybody but my mom did get a replacement so I didn't care too much. The fan has a ground from the mount(copper), ground from the middle of the fan(copper), a hot for the light(blue), hot for the...

View more questions Search