Ask Experts Questions for FREE Help !
Ask
    willing292's Avatar
    willing292 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 21, 2007, 09:28 AM
    Honeywell CT3200 - fan continuously running
    I just noticed that regardless of whether the FAN switch is in the AUTO or ON position, the fan is continuously running. It just started to do this, this past week, up until now it was fine, only running when the furnace kicked in.

    When I turn the SYSTEM switch from HEAT or COOL to OFF, it still continues to run.

    Any help will be appreciated - I'm trying to save on a service call, if it's something I can fix myself.

    Thanks.
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #2

    May 21, 2007, 04:06 PM
    Problem is in the furnace/air handler fan contol, either a relay or a PC board. A tripped limit will do this in many furnaces to.
    sbartnikowski's Avatar
    sbartnikowski Posts: 1, Reputation: 1
    New Member
    		  
    #3

    May 21, 2013, 02:17 PM
    So, replacing the thermostat will not fix this problem?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heat pump AHU fan runs continuously [ 2 Answers ]

I have a 12 year old Trane Xe1000 heat pump. Recently I noticed that the fan keeps running continuously even when the outside unit turns off. It's as if the tstat fan switch is set to On (it's not) instead of Auto. I tried a few things: 1) In the tstat (weathertron) I disconnected the fan...

Honeywell CT3200 for Fireplace [ 1 Answers ]

I've replaced the CT3200 that came with the house with a newer thermostate. Now the simple spring thermostat from the gas fireplace just quit. Can I use the 3200 to simply turn the fireplace on and of at a given time? There is only a black and white wire coming out of the wall and W Y G and R...

Both fans continuously running, but neither heat or ac kicks on [ 3 Answers ]

This is a '93 Goodman gas model furnace. From what I have read, I believe it may have a bad limit switch. Where would this be located and how can it be tested? There is a small Black component (roughly 3x2")with a Blue on/off switch located on the furnace where gas passes. I believe this may be the...

Using the furnace blower fan continuously [ 3 Answers ]

Please let me know if it is more efficient to have the blower fan on continuously rather than in the automatic position. If so, does it make a difference in heating mode or AC mode?

Outside fan runs continuously [ 5 Answers ]

This is a very helpful sight and I am hoping someone can give me some advice. I have a fairly new house (5 years old) and I am having some problems with a Carrier unit. At the end of this summer it started tripping the breaker on very hot days and we called a technician whom found nothing wrong. ...

View more questions Search