Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Corian shower repair
[ 6 Answers ]
I have a Corian shower. The floor of the shower was made with angled pieces and put together with epoxy. The angles were done so the water would drain. Expanding foam was used under the Corian. The epoxy seams have cracked and are leaking. How can this be repaired or can it? Can a thickness(maybe...
Repair leaded-in shower drain.
[ 1 Answers ]
Hello all, I need to replace a galvanized "p" trap which was leaded in the brass shower drain. I've got the old "p" out and have a new cooper tail piece ready to go into the existing lead. (The new "p" will be PVC and connected to existing downline pipes with a no-hub.) My Q: Can I heat the...
Sheetrock repair in shower
[ 2 Answers ]
The part of my daughter's shower with the shower head is constantly in need of repair. Not sure if they spray it on the sheetrock or what, but this is the 3d time I've had to replace the rock. Is there an alternative replacement for sheetrock (i.e. finished plywood) or is sheetrock the best way...
Shower drain repair
[ 2 Answers ]
I believe my shower pan drain is leaking. When I step near the drain the thin washer between the shower base and the drain body squeezes out from under the drain lip. The base does give a little bit as I don't believe the shower drain nut was tightened enough before placing the shower base in...
No water after shower stem repair
[ 2 Answers ]
My shower faucet and handles had some minor dripping problems, so I decided to repair the hot and cold stems (2 handle shower stall). I got a repair kit and replaced the washers and changed the seats, but when I put the stems back and turned the water back on, there is no flow to the shower head!... View more questions Search
|