Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Shower leaking (shower drain pipe?)
[ 2 Answers ]
Hi, I will apologize up front for my lack of knowledge in plumbing... but I know enough that I believe that I can fix this problem without having to add on the expense of calling a plumber. I noticed that there were a lot of ants coming into our bathroom. After laying traps and having no...
Rebuilding Shower - Leveling new shower drain?
[ 5 Answers ]
Hello, I have come to the postings to get some help as I am a novice plumber. I've gutted my ensuite tilled shower down to the floor. In whacking out the cement pan, and I assumed that I've probably cracked the old drain so when I got to the wood floor I cut away the older PVC 2" piping back...
No water after shower stem repair
[ 2 Answers ]
My shower faucet and handles had some minor dripping problems, so I decided to repair the hot and cold stems (2 handle shower stall). I got a repair kit and replaced the washers and changed the seats, but when I put the stems back and turned the water back on, there is no flow to the shower head!...
Repair Kit for Florestone 4234-1 Shower Receptor
[ 2 Answers ]
Esteemed Assistants, We have a 20 year old builer-installed Florestone 4234-1 shower receptor (base, integral drain with Wedge-lok Seal). On discovering a leak in the finished ceiling below, my handy brother-in-law applied silicone caulk to the exposed areas around the top and bottom of the...
Converting cast iron floor drain to shower drain
[ 3 Answers ]
I am adding a bathroom to my basement, which has partial (complete? ) plumbing already roughed into the floor (in 1976). Sewage lift station (vented) is 3 ft from 4" styrofoam plug (toilet), 4 ft from 1 1/2 inch cast male pipe end extending through floor (lav, have already added vertical vent... View more questions Search
|