Not your question?
  Ask your question
  View similar questions
   
  
 Add your answer here.Check out some similar questions!
Temp set at 72 but temp won't go above 66
 [ 2 Answers ]
 We have a Lennox Pulse 21 furnace. Temp is set at 72 but the furnace stops once the temp reaches 66 degrees. Thermostat seems to be working. The seems to be a problem just when it is really cold (0 to 10 degrees). 
Selecting Thermostat with proper temp.  Differential
 [ 5 Answers ]
 Hello - Recently I had Lux digital thermostat replaced. After several attempts with Honeywell tstats -- that were cycling the death out of my furnace -- had contractor install White-Rodgers 1f56-444 mercury-style tstat. After devouring this site, I learned to adjust the heat anticipator to 1.2 A,... 
Air conditioner condenser air temp
 [ 7 Answers ]
 I was wondering if the temp coming form the outdoor condenser should be really warm, like that coming out of a furnace, or just mildly warm, like around 90. Does the temp coming out have anything to do with performance or cost? I ask this because I live in an apartment, and the downstairs... 
Temp gauge showing temp, 2001 Chev Malibu
 [ 13 Answers ]
 I have a 2001 Chev Malibu LS, V6, temp gauge is not showing any heat at all, not registering when I know the coolant is hot ? Veh has about 126000 mi on it, never been flushed out, thought I would attempt to flush myself but don't you think the problem might be a bad thermostat ? If so, where and... 
Question about supply temp. & return temp.
 [ 3 Answers ]
 
The AC system produced supply temps. At 57-60 degrees on the first floor With a return temp. of 71 degrees. The second floor supply temp. is at 59 degrees with a return temp. of 72 degrees. I know there should be at least a 15 degree temp. difference from the supply to return. There was also an... View more questions Search 
  |