Ask Experts Questions for FREE Help !
Ask
    Mribera's Avatar
    Mribera Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 12, 2017, 08:25 PM
    Maple chase thermostat
    I changed the bAtteries on our Maple ChAse thermostat and can not get the tempature numbers back on the panel, all the numbers are all up . Do u have to reset it and how do u do that

Check out some similar questions!

Maple/ chase thermostat [ 23 Answers ]

I let the batteries run low on my thermostat. I just replaced them but the display still reads "lo bat" and the heat does not kick on. I checked the fuse and it is still intact. Please help!!

Maple Chase thermostat [ 0 Answers ]

My thermostat says Lo Bat, but there are two new batteries in it. What can I do to fix it

Replacing maple chase thermostat with ritetemp thermostat model # 6030 [ 0 Answers ]

Replacing maple chase thermostat with ritetemp thermostat model # 6030

Maple chase thermostat [ 1 Answers ]

In the Heat mode, the burner does not come on. The fan does not come on when the ON is selected in either the Heat or Cool mode. The system remains inoperative when the Cool mode is selected. The batteries are good. Is this a thermostat malfuction?

Maple chase thermostat [ 1 Answers ]

I have a Maple Chase Thermostat 9600 & a furnace which is adequate. There is a long delay between the time the furnace shuts off & when it turns back on. Is there a hidden setting in the TS which will allow a shorter time between heating cycles?

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.