Ask Experts Questions for FREE Help !
Ask
    machineguy's Avatar
    machineguy Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 31, 2017, 06:40 PM
    Furnace issue.
    I have a 30yr old Luxaire gas furnace.The burners will not fire when turned on. The thermostat was replaced. I am getting voltage into the limit switch but not out. The igniter is glowing. Should I replace the limit switch or the gas valve?

Check out some similar questions!

Furnace issue [ 0 Answers ]

Furnace blowing cold air and thee ac unit comes on when we turn the heat on. What would cause that

Furnace issue [ 1 Answers ]

I have a gas furnace and it keeps turning on every two minites then goes off after about a minite then back on in two then over and over again any one know what the issue could be. Thanks for your help

Furnace issue [ 1 Answers ]

My furnace blower has been running for three days straight whether the heat is on. What could it be:mad:

Furnace Issue [ 4 Answers ]

Hi, I have A Carrier Weathermaker SX furnace, model 58sx040-cc. When the thermostat calls for heat the draft inducer motor turns on, then the burner ignites. After the burner has run for about 30-45 seconds, the blower motor is triggered and comes on, but the burner and inducer shut off. Then...

Furnace issue [ 2 Answers ]

The burners kick on for about 5sec and then kicks off. This cycles a few times and then shuts down.

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.