Ask Experts Questions for FREE Help !
Ask
    2003 dyna's Avatar
    2003 dyna Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 21, 2017, 01:51 PM
    Ignition
    I'm charging battery, all I get is clicking sound
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #2

    May 21, 2017, 02:20 PM
    If this is an auto battery, and the clicking is fast pitch, the battery still does not have enough amps. Best bet would be to get a set of jumper cables and have some one jump start your vehicle, then let the battery recharge itself with the car running.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #3

    May 24, 2017, 07:10 AM
    Is the clicking while charging, or when turning key?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Where is the ignition relay on a1988 honda accord ignition switch relay [ 2 Answers ]

I have a 1988 Honda Accord LXI, Automatic. When it is cold it starts and runs fine , when it warms up, it won't start and run at all!! Does anyone have any idea as to what is causing this?! bloway27

Self Ignition & Auto Ignition Tempetature [ 0 Answers ]

What is the difference between self ignition & Auto Ignition temperature property of any fluid?

False or audible ignition takes place (sounding louder than a regular ignition) [ 0 Answers ]

Thank you again for reading - this forum is awesome! I've got an Intertherm G5RC100-16 natural gas furnace that's now got a new issue: a false or audible ignition takes place (sounding louder than a regular ignition) after the ignitor becomes hot and the gas valve turns on. Once I even saw a...

No power to ignition module or PCM ignition fuse, any thoughts [ 1 Answers ]

It's a 2001, Pontiac, Grand am, v-6 3.4. with the key in the on position there is no power to the ign mod, f/p inj, and pcm ing. so naturally its no start. I'm not sure of the circuit , the wire diagram is a little help, any suggestions? Frustrated

Key will not come out of the ignition. [ 1 Answers ]

I took my Jeep to have turn signals checked .They were working sometimes sometimes not. They replaced the flasher which was under the dash . After I took the car home I can not get the key out. Of course the repair shop is closed any ideas . I have tried moving into park several times . It will...

View more questions Search