 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trane xe1000 no emergency heat
I have a Trane xe1000 with emergency gas heat. I have a Honeywell rth3100C thermostat. Get no emergency heat most of the time. If emergency heat does come on it turns cold once it reaches the set temperature AND the fan continues to run for 20-30min blowing cold air.Any suggestions?
|
||||
Check out some similar questions!
My trane xe1000 air conditioner runs for a few minutes, then stops and reverses directions, and blows warm air. What could be the problem?
I recently had my a/c quit working. Called out a Handy man who told me it was just fuses and he replaced them. 3 weeks later they blow again. I go out to the box to pull the fuses... pull them - and they are different sizes. One is 35Amp and one is 50Amp. Is this normal? I don't know what...
The emergency heat keeps activating and the unit runs constant while the emergency heat is activated. The unit while not exceed the temperature setting on the thermostat. The unit seems to be operating okay, but it does not cycle on and off. When I change the thermostat from say 68 to 70 the...
:(:( I have a Hunter 44660 Thermostat that I am trying to connect to my Trane XE1000 Heat Pump. I think I have the wires not correct. The pump wires are (yellow,Red,White,Orange,Black,Blue, Green) and the Thermostate has Y1, RH, RC1, RC1, RC, Y/O, W/B, G. Can someone help?
Hello, I have the following systems, each set is functional and individually controlled by two separate Trane Weathertron BAYSTAT240 thermostats. Set 1: Trane Weathertron: BAYSTAT240 Heat side Trane XE78: TUD080C936A1 (Date: 02/1993) Cooling side Trane XE78: TXCO36C4HPB0 (date H06) Heat...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
