Ask Experts Questions for FREE Help !
Ask
    opuslive's Avatar
    opuslive Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 26, 2010, 07:19 AM
    Trane xe1000 fuse
    I recently had my a/c quit working. Called out a Handy man who told me it was just fuses and he replaced them. 3 weeks later they blow again. I go out to the box to pull the fuses... pull them - and they are different sizes.

    One is 35Amp and one is 50Amp. Is this normal? I don't know what size to put back in. I put in 35A just to be safe.

    I can't seem to find anything to tell me the right size fuses.
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #2

    Jul 26, 2010, 08:17 AM

    What size ac do you have? In less it is a 4 or 5 ton the it is a 30 amp if it is a 4 or 5 ton with # 8 wire then the 50 is fine
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing trane xe1000 condenser with a payne unit [ 7 Answers ]

Hi, I have a trane system the airhandler section replaced in 2007 and the trane xe1000 condenser is 9 yrs old, and seems the compressor is bad and believe it is a pump type. A contractor said he could replace the consender with a payne unit (regular type I think) and bypass the pump type and...

Big Trouble - The fan on my Trane XE1000 stopped spinning - I live in Fl - part 2 [ 3 Answers ]

I have a 7 year old Trane XE 1000 and 2 days ago the fan simply stopped spinning. I also noticed that I have a blinking fan icon on the thermostat in the house. When I turn the unit on (in the house), I can hear the outdoor unit doing something but the fan does not spin. The whole system was...

Hunter 44660 Thermostat to Trane XE1000 Heat Pump Wiring Problems [ 1 Answers ]

:(:( I have a Hunter 44660 Thermostat that I am trying to connect to my Trane XE1000 Heat Pump. I think I have the wires not correct. The pump wires are (yellow,Red,White,Orange,Black,Blue, Green) and the Thermostate has Y1, RH, RC1, RC1, RC, Y/O, W/B, G. Can someone help?

Trane XE1000 Fan Knocking at stop [ 1 Answers ]

My 1995/6 Trane XE 1000 5-ton unit's fan knocks when it turns off. It runs fine, but am concerned that something is potentially wrong. I cleaned the unit today and looked at the fan and it didn't seem loose or that the bearings were shot. Any suggestions would be appreciated. Mark San Antonio

Trane XE1000- won't cool, blows, [ 3 Answers ]

Manufactured in 2000, 40 rated fuse outside next to unit, 45 at main power box, won't cool, hear light buzz or hum from external unit, I can replace anything needs replacing on the outside, on a budget, need to know what to trouble shoot, seems fuses are good. :mad:

View more questions Search