Ask Experts Questions for FREE Help !
Ask
    jethrow123's Avatar
    jethrow123 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 10, 2016, 02:51 PM
    Everstar portable air conditioner mpm1-10cr-bb6 p2 code
    P2 code appears on the control panel, and unit shuts down.
    There is no water in bottom drainage.
    The unit's exhaust air seems to be extremely hot..
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
    		  
    #2

    Jul 11, 2016, 05:17 AM
    http://www.everstarportableaircondit...bb6-manual.pdf

    P2 Water full protection.

    Water full protection.There are four switches on the base-pan water tank. S1, S2, S3, S4.As you see the below graph.If the water level exceed WL1, S1 activity, the Pump 1 that in charge of shower system start towork. The fan motor maintains the origin state. After 1 hour, if the water level still exceed WL1,but not exceed WL2. The outer fan motor will turn to low fan. If the water level drop below theWL1, the pump 1 will have 2 minutes delay to shut down.If the water level continues rise and reaching WL2, S2 activity, the outer fan turn to the low fan,after 20 minutes later, the pump 2 that in charge of drain water out start to work, drain thewater to the auxiliary tank. If the water level drops below WL1, the pump 2 stop and the outerfan motor maintain the low fan.At the above 2 steps, if the unit turn from cooling mode to heating and dry mode, the pump 1and pump 2 stop immediately.
    Page 14-18 explains it. Also browse closely and check section 8.4 starting about page 16. You may need a qualified tech for this discontinued A/C.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

P2 error on my everstar portable AC model number MPM1-10CR-BB6 but no water present [ 0 Answers ]

P2 error on my everstar portable AC model number MPM1-10CR-BB6 but no water present. I bought the AC used and when I got it home my husband noticed there were a lot of screws missing. It didn't seem to effect it at first. Plugged it in and worked great for two weeks.

Portable air conditioner not blowing cold air [ 0 Answers ]

I have a everstar portable air conditioner mpm2-10cr-bb6 that was given to me , it blows strong but is not blowing cold air. I have played and set everything accordingly with no luck, I have one hose but no water inside to drain, or at least it isn't coming out. Really need to fix this , I'm...

How to vent a portable air conditioner [ 1 Answers ]

Is it OK to vent a portable air condition through a furnace cold air duct? The way my windows open, it is impossible to vent my portable air conditioner through them. I don't know where else I can vent it. My latest thought is through a cold air duct to the furnace. What do you think? Hope someone...

Portable air conditioner [ 2 Answers ]

Does anyone know about recharging the freon in a portable air conditioner? Someone is selling one on craigslist, but says that it needs a recharge, but he doesn't know where or how to get the freon. Any help is appreciated. Thanks.

Portable air conditioner [ 2 Answers ]

I'm looking for a portable air conditioner to cool a 360 sq foot garage which is on the north side of the house. There are no windows except in the garage door. I also need a unit that is reliable and quiet. I have searched the Internet and know more about these units than I ever wanted and the...

View more questions Search